Realforce RC1 Skrrt

The Realforce RC1 Skrrt is a two piece 3d printed component made specifically to fit the Realforce RC1. The Skrrt will add a stylized look to your RC1 and it comes in a ton of different variations. Please note, if you choose a variation that requires more colors, leave a note and mention what you would like!  Some things to know about the Skrrt are:

• It retains the stock typing angle
• Including the rubber feet, it adds an extra 1.5mm - 2mm of height to the front.
• 1mm foam Anti Vibration Pad at the bottom of the Skrrt reducing vibrations
• The adjustable feet on the RC1 are still useable and accessible, however the base of the Skrrt may slide down if force is applied to it.
  
• Print resolution of 0.2mm making the print smooth, however the top edges of the base will have some print lines as a result of the angle it is printed at. 
• Two piece construction including a base and faceplate held together with magnets.
• All colors will be made using PLA
  
• Additional faceplates may be purchased if you want to add some color variation to your RC1, however this product is only for the Base AND Faceplate. 

This Skrrt is compatible with the Realforce RC1. This Skrrt is NOT compatible with any other Realforce variations. All variants will include the anti vibration pads by default (pre installed) and a set of 4 rubber feet pre-installed. For other variations of this product, check out our store.

The Realforce RC1 Skrrt comes in one size with several different variations as outlined below. With a wall thickness of 7.5mm and a large "forehead" you may choose from two base options and three faceplate variations. You can choose base color and any faceplate color independently, creating endless possibilities!

BT Base - Integrated BT button hole for easy access, can be made in one color. 

Standard Base - No BT hole for a clean look, board must be removed from base in order to access the BT button. Can be made in one color. 

Pen Rail Plate - No badge, magnetic faceplate with integrated pen rail that can be made in a separate color from the faceplate itself. 

Blank Plate - No badge, no pen rail, just a plain faceplate that can be made in one color. 

Real. Badge plate - Recessed channel with magnets allowing you to swap badges (badge will be made with two colors of your choosing) and the faceplate will be made with one color.