HHKB Pro 1 Skrrt

The HHKB Pro 1 Skrrt is a 3d printed component made specifically to fit the HHKB Professional (Pro 1). The Skrrt will add a stylized look to your HHKB and it comes in a ton of different variations. Some things to know about the Skrrt are:

• It retains the stock typing angle
• It can be used with the included rubber feet yielding a 3.5mm height increase 
• It can be used without the included rubber feet yielding a 1.5mm height increase
• 1mm foam Anti Vibration Pad at the bottom of the Skrrt
• The adjustable feet on the HHKB are still useable and accessible
  
• Print resolution of 0.12mm making the print smooth and precise
• One piece / one print construction
• All colors will be made using PLA
  

All variations will be compatible with the HHKB Professional (Pro 1). The Skrrt is NOT compatible with the HHKB Professional 2, HHKB Professional 2 Type S, HHKB Classic, HHKB Hybrid or HHKB Pro BT. All variants will include the anti vibration pads by default (pre installed) and a set of 6 rubber feet (not installed). For other variations of this product, check out our store. 

First choose your height / style which determines if you want a front height of Short (3.5mm) or Tall (7mm) on the Skrrt. The tall option will keep the Skrrt mostly flush with the existing seam line between the top and bottom of the Pro 1 case. 

Finally choose your thickness, the Skrrt will come in Thin (2mm), Medium (3mm) or Thick (4.5mm)